A: Generally a lithium polymer battery model name consists of four parts, the brand name, the battery thickness, width and then length. For example, PD103450, PD means Padre Electronics battery brand, 10 is 10mm thick, 34 is 34mm wide, 50 is 50mm long. However, for some special LiPo batteries, there will be an additional information added after the length. For example.PD105060D, means low temperature type PD105060 lithium polymer battery, “H2~H60”means 20C~60C high rate battery.
A: These dimensions is only the single battery cell size, PCM (protection circuit module) is not included. After adding the PCM onto the lithium polymer battery cell, the final battery pack will be longer by 2mm maximum. For example, there is a model PD303040 in above list for 30mm wide batteries, its dimension is 3*30*40mm, after adding PCM, it’s dimension becomes 3*30*42 maximum.
A: This depends. If the Li-polymer battery cell is thicker than 3.5mm, then you can ignore the affects, but If it is less than 3.5mm, adding a PCM can always possibly make the battery pack thicker than the original battery cell, the main difference is the header place where we put the PCM. No matter how thin is the lithium polymer battery cell, so long as you add the PCM on it, it will have max thickness of 3.5mm.
A: No. First of all, we develop lots of new battery models now and then, however, they may not appear on the list before we update the contents. Secondly, with the same molding/tooling, we can create many new models easily if we need. So, the above 3.7v lithium polymer battery list is still part of what we have and what we can do.
A: Sure. With these 3.7v polymer battery cells, we can make custom LiPo battery packs of different configurations, such as 7.4v 11.1v, 14.8v, 22.2v, 25.9v and so on.
A: Yes. As soon as we agreed on the battery solution with clients, we can prepare and send the battery datasheet for their approval and confirmation, it’s always a step before an order is placed.
A: In case we have the same battery in stock, and customer is willing to pay transport cost, we can help on this. But we don’t recommend end consumers to buy from us for personal use purpose, after all, it is very expensive to ship one pcs battery or two between different countries.
A: For 10mAh~4000mAh LiPo battery, our regular MOQ for mass production is 500 pcs, but we can support trial order quantity such as 200 pcs, 300 pcs before mass production.
A: Yes. Our guaranty time is one year after delivery. So long as we confirm it’s our problem in manufacturing, we will take responsibility of replacing new ones. If it’s caused by incorrect use or abuse, we will not be liable.
Contact:Jim Xie
Phone:+86-13510302497
Email: Xiezhenghong@slelectronic.com
Add:Daguangling Village,Chenjiang Street,Zhongkai high-tech district,Huizhou City,Guangdong Provice,China